Table of Contents
Advertisement
Step 6: In "TV System Selection", select the television mode to NTSC or PAL depended
on your TV.
Note: 1. If you do not know which system your TV provides, please check with your TV
supplier.
2. If you use the SCART TV, select the television mode to PAL.
Step 7: Press "ECS" key to return the BIOS SETUP Main menu.
Step 8: Press "F10" key to save and exit the setup program.
How to adjust the best video quality of your TV Output?
This section explains how to adjust the computer's display settings under Microsoft
Windows to optimize them for use with a television as the display device.
Follow the procedure outlined here to make the necessary settings.
I. Set the display font to the largest size.
Please follow this procedure to adjust the display font size.
CMOS Setup Utility – Copyright ( C ) 1984-1999 Award Software
Integrated Peripherals
OnBoard IDE Channel
Enabled
IDE Master PIO
Auto
IDE Slave PIO
Auto
IDE Master UDMA
Auto
IDE Slave UDMA
Auto
USB Controller
Enabled
USB Keyboard Support
Disabled
Onboard Audio/Modem Chip Enabled
Onboard Lan Chip
Disabled
IDE HDD Block Mode
Enabled
POWER ON Function
Hot Key
KB Power ON Password
Enter
Hot Key Power ON
Ctrl-F1
TV System Selection
NTSC
Onboard FDC Controller
Enabled
Onboard IR Port Select
Disabled
IR Mode Select
IrDA
IR Duplex Mode
Half
Onboard Parallel Port
3BC/IRQ7
How to install your system with SCART TV console?
Item Help
Menu Level
5 – 3
Advertisement
Table of Contents
