Kodak Advantix Advantix Preview Quick Start Manual

Kodak
Preview Camera
ENGLISH/ESPAÑOL
Quick Start Guide
Viewfinder Flash/Camera-Ready Lamp
Shutter Button
Print-Format
Button
Preview
Screen
Brightness-
Control
Button
DATE
TITLE LCD Panel MRC MODE
Web site (USA): http://www.kodak.com — Help Number (USA): 1 (800) 242-2424
Kodak, Advantix, and the Advanced Photo System
Pt. No. 919 4929a symbol and logotype are trademarks.
Load the Batteries Set the Date and Time
Uses two 3 V lithium KODAK K123LA
1. Lift up the lens cover/flash to turn on
(or equivalent) Batteries. the camera.
1. Open the battery door on the 2. Press and hold
number "blinks."
bottom of the camera.
2. Insert the batteries into the
battery chamber.
3. Snap the battery door closed.
Zoom Dial
3. Move the Zoom Dial to select
PREVIEW
the number.
4. Press
SELECT
Load the Film actuate the next blinking number. Repeat
steps 3 and 4 to continue setting the date
1. Slide the Film-Door Lever to open
ENTER and time or close the lens cover/ flash to
film door.
end your selection.
2. Insert the film into the film chamber.
Choosing the format
Film-Door
Lever 3. Close the film door. You can now
You can choose from three formats:
take pictures.
(month/day/year, day/month/year, or
year/month/day) and time format
(hour/minute) with PM or AM display.
1. Repeatedly press
a format.
2. Press
to save the format.
Printed in U.S.A.
Preview the Print
You can be sure you got the shot when you
preview your picture on the Preview Screen .
After you take a picture, you can press
DATE until the first
to immediately see your picture.
PREVIEW
The last picture you take, at any time, is saved
into the memory of the camera and remains
EXP
DATE LEFT
there until you take the next picture or
remove the film from the camera.
AUTO
TITLE
PREVIEW
to save the number and to
ENTER
NOTE: To conserve battery power, the
Preview Screen automatically turns off in
10 seconds. Press to turn the
PREVIEW
screen back on or press it again to turn it off.
DATE to choose
ENTER or close the lens cover/flash
Select the Print Quantity 1. Press PREVIEW . The print-quantity
1
number P"1" blinks.
You can select the number of prints,
from 0–9, that you want your photofinisher
EXP
LEFT
to print while previewing the picture.
The magnetic Information Exchange (IX) AUTO
technology records the ordering information
on the film, so the selected number of
each print is produced automatically
during processing.
2. Move the Zoom Dial to select the
If you are happy with the picture, you can print quantity.
order multiple prints. Selecting multiple prints
does not mean that you will use more film.
The camera exposes one frame of film for
every picture that you take no matter how
many prints you order for each frame.
If you are unhappy with the picture, you
can select "0" for zero and take a new
3. Press or close the lens cover/flash
ENTER
picture. Selecting zero prints does not mean
to save the print quantity.
that you will lose the picture. The picture
remains on the film and prints can be made
EXP
from it later, if you change your mind.
LEFT
AUTO
Change the Print Format
You can see on the Preview Screen how
your print will look in the different formats —
for example, to see how a picture taken in
the Classic (C) format would look if printed in
the Group/HDTV (H) or Panoramic (P)
ISO
format. You can then change the format to
the one that looks the best. The selections
are recorded directly on the cassette, so the
sizes of each print are produced automati-
cally during processing.
1. Press to view the picture.
PREVIEW
2. Press the Print-Format Button to change
the format of the picture to C, H, or P.
C H P
ISO
C H P
3. Press or close the lens cover/flash
ENTER
to save the print format.
© Eastman Kodak Company, 2000