LG 26LH1DC1-UB Service Manual page 18

082 CHKSUM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAR RGB EN.
088 EN NOISE MUTE
090 KEY LOCK
091 YPrPb2 EN
092 RGB2 ENABLE
093 RJP AVAILABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
101 IR BLASTER
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
107 BANNER
116 VIDEO MUTE EN
117 FACT DEFAULT
Copyright©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
000~1 001 Enforces rigid M.P.I. checksum.
000~5 005 Relaxes M.P.I. timing to be compatible with PC based Windows controlled systems.
000~1 000 Removes block hours setting for Parental Control and make blocks permanent.
000~2 002 Enables RGB1 input, set to 1 for DTV, or 2 for PC. Set to 0 to disable.
000~1 001 If set to 1, mutes audio if no signal is present.
000~1 000 If set to 1, keyboard is locked out, IR is still functional.
000~1 001 Set to 1 to enable plasma Component 2 input jacks.
000~2 002 Enables RGB2 input, Set to 1 for DTV, or 2 for PC. Set to 0 to disable.
000~1 000 Set to 1 to enable.
000~1 001 Set to 0 to disable feature on Function menu. Set 1 to enable feature on Function menu.
000~134 002 Sets default aspect ratio at power up. See detailed descriptions and item 106.
N/A N/A Not applicable.
000~4 004 Selects ATSC band.
000~1 001 Sets ATSC tuning mode. Set to 0 for virtual channel, set to 1 for physical channel.
000~255 000 Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
000~1 000 Retains set aspect ratio on power cycle. Set to 0 for default ratio on power cycle.
N/A N/A Not applicable.
000~1 000 Set to 0 for normal, set to 1 for Blank.
000~1 000 0=Normal. 1=Loads presets of all above settings.
-18- LGE Internal Use Only