Mounting Hardware - Dexter Laundry SWAY CONTROL Operation, Maintenance & Service Manual

It is essential that the DSC be oriented in the proper direction
when it is installed.
Ensure the electric brakes are adjusted and
maintained in accordance with the manufacturer's
recommendations in your owner's manual for proper
operation of the sway control module.

Mounting Hardware

The DSC should be mounted using the mounting flanges which
are located on both sides of the unit. Included are four (4) #10
self-tapping screws to mount the DSC to the trailer.
You must NOT drill holes in the DSC for any reason. Drilling holes
or puncturing the unit VOIDS YOUR WARRANTY.
Do not spray high pressure water on the DSC. The DSC
is a weather sealed water resistant unit, but it is not
designed to withstand direct high pressure spray from a
power washer.
CAUTION
CAUTION
-4-