Troubleshooting - Kobian CyperPix E685P User Manual

Kobian cyperpix e685p: users manual
Table of Contents

Advertisement

TROUBLESHOOTING

Refer to the symptoms and solutions listed below before sending the camera for
repairs. If the problem persists, contact your local reseller or service center.
Power Supply
Symptom
The power does not
come on.
The power cuts out
during use.
The power does not
go off.
The battery runs out
quickly.
The battery or
camera feels warm.
Cause
The battery is not loaded.
The battery is exhausted.
The AC power adaptor is
not connected correctly.
T h e c a m e r a w a s l e f t
unattended and unused,
so the auto power off cuts
it off.
The battery is exhausted.
Camera malfunction.
It is being used in extreme
low temperature.
M a n y s h o t s a r e b e i n g
captured in dark places
inside, requiring flash.
The battery is not fully
charged.
The battery is not used for
an extended period of time
after charged.
Long period of continuous
use of the camera or the
flash.
Solution
Load the battery correctly.
Recharge or use the AC
power adapter/charger.
Reconnect it properly.
Turn the power back on.
Recharge or use the AC
power adapter/charger.
Reload the battery. If using
the AC power adapter/
charger, reconnect it.
Fully charge the battery
and discharge it for at least
one complete cycle before
u s e t o m a x i m i z e i t s
performance and lifetime.
EN-71

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CyperPix E685P and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents