• The fi tting must be properly connected to the fl exible 1.1 Introduction tube/pipe system. • These instructions apply to series 6M plug valves, also • Before installing the fi tting make certain that external referred to below as fi ttings.
2 Manufacturer’s Specifi cation 3.2 Dimensions 6M302F 2.1 Description The Series 6M plug valves are small and compact and especially suitable for laboratory use. 2.2 Transport and Storage • The fi tting must be protected against mechanical da- mage, moisture, dirt and dust. The storage temperatu- re range is 10 –...
• If a plastic fi tting is used in combination with a metal- 6M302F lic male fi tting, additional sealing with Tefl on® tape is recommended. 6M303F All data in m³/h www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
• Failure to observe information provided here may lead to injuries, material damage, malfunctions and impuri- ties due to escaping medium. www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Page 7
11 Contact In case of questions or suggestions please contact us: EM-Technik GmbH Industriestr. 2 +49 6237 407-0 67133 Maxdorf Fax +49 6237 407-77 Germany info@em-technik.com www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Need help?
Do you have a question about the 6M and is the answer not in the manual?
Questions and answers