Page 3
fl owing out of the line or remaining in dead spaces. • Components should only be retrofi tted after consulta- tion with the manufacturer. www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Page 4
100°C 110°C 120°C 130°C 140°C 150°C 3.4 Kvs Values Article number DN04 DN10 6X701F 0.61 All data in m³/h ØD 1/4“ 1/2“ 88.5 67.5 All data in mm www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Page 5
Control function 3 – Double acting (DA): Ball valve resting position: undefi ned. The valve is opened and closed by activating the respective control medium connectors (connector 2: open / connector 1: close) www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Page 6
Improper installation or assembly. Just as well as inap- propriate use, dismantling or modifi cation. • Failure to observe information provided here may lead to injuries, material damage, malfunctions and impuri- ties due to escaping medium. www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Page 7
12 Contact In case of questions or suggestions please contact us: EM-Technik GmbH Industriestr. 2 +49 6237 407-0 67133 Maxdorf Fax +49 6237 407-77 Germany info@em-technik.com www.em-technik.com EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany info@em-technik.com...
Need help?
Do you have a question about the 6X Series and is the answer not in the manual?
Questions and answers