Manual Supplement – SafEye 950/960
Please note that since the attached manual for the SafEye 950/960 was released, the following
changes have been made
The following sections have been corrected as follows:
3.2 Applications
The Quasar 950/960 SafEye system can be used to monitor toxic gas
concentration in various applications, such as:
•
Petrochemical, pharmaceutical, and other chemical storage and production
areas
•
Toxic chemical storage sites and hazardous waste disposal areas
•
Detection of H
pipelines, refueling stations, and fuel storage facilities
•
Transportation depots and shipping warehouses of solvents (aromatic and
polymers origin), degreasing and cleaning solvents
•
Styrene monomer, polymers, and plastic industries
•
Ammonia production facilities, storage, and transportation
•
Air conditioning, refrigeration, and agriculture application areas for ammonia
and derivatives
•
Semiconductor industry, in which ammonia concentration monitoring is
required
3.3.4 Detected Gases
The following toxic gases and vapors are detected by the UV SafEye models
according to their unique spectral absorption in the UV solar blind range:
•
SafEye 960: Hydrogen Sulfide (H
characteristic smell of rotten eggs. It is perceptible in air at concentrations of
0.001–0.1ppm, with a sweetish taste, and a TLV-TWA of 10ppm.
H
S is heavier than air and very dangerous to humans, causing collapse,
2
coma, or death from respiratory failure within a few seconds of inhalation.
Early detection of H
prevent its toxic influence.
8200 Market Blvd, Chanhassen, MN 55317, USA
Phone: +1 (973) 239 8398
Website: www.spectrex.net Email: spectrex.csc.rmtna@emerson.com
S in desulfurization processes at refineries, oil platforms,
2
S): A flammable, poisonous gas with a
2
S at concentrations of up to 10ppm is essential to
2
Supplement_950960_Aa
Need help?
Do you have a question about the SafEye Quasar 950 and is the answer not in the manual?
Questions and answers