Advertisement
Quick Links
Termination
Plug Body
Module
Remove
Jacket
~ 2 in. (51
mm)
F/UTP shown here
!
See back page for other
cable types.
UTP (skip to step 2C)
2a
TIP: Arrange pairs in line prior to insertion
leading with the brown pair along with either
the orange for T568A or green if T568B.
Arrange pairs and
If pair
insert into module.
crossing, keep
(see tip above prior
close to jacket
to insertion).
4
Z-PLUG Termination Instructions
Boot & Latch
Protector (optional)
Invert
Foil
Foil
Remove
Mylar Wrap
Prep foil/drain wire,
2b
remove mylar
Good
F/UTP
(23-26 AWG)
Flush Cutters
Z-PLUG
Termination tool
(p/n: Z-TOOL-ZP)
Tools
Wrap
Drain
wire
Remove center spline
2c
Not
Good
Jacket
Stripper
1
If pair crossing is
necessary, this should be
done before next step.
8 7 4 5 < Pin#'s > 2 1 6 3
3
Braid wrap
direction
End of
Tip for 22 AWG
Jacket
S/FTP: Wrap
braid on top of
foil pairs in
direction of door.
*S/FTP
22 AWG
*Other cable preparation recommendations and
supplemental instructions are available for these and other
cable types. See back page for additional details.
Optional
Accessories
!
T568A
T568B
Foil over
inner jacket.
Aramid yarn
End of
outer
jacket.
*OSP
F/UTP 23 AWG
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Siemon Z-PLUG
Summary of Contents for Siemon Z-PLUG
- Page 1 Z-PLUG Termination Instructions Optional Accessories Flush Cutters Z-PLUG Termination tool (p/n: Z-TOOL-ZP) Boot & Latch Termination Plug Body Protector (optional) Module Jacket Stripper Tools Invert Foil Remove Jacket If pair crossing is ~ 2 in. (51 Foil Wrap necessary, this should be Drain done before next step.
- Page 2 Z-PLUG Termination Instructions Insert onto matching shape with door side up. Click Door Press Tip for larger OD cables: Press to seat before closing door. Close door with fingers or with tool Flush Cutters only Trim flush 0-1 mm Lace all (<0.04 in.)
- Page 3 Z-PLUG Termination Instructions PRESS PRESS Fully terminated latched position Ensure plug sits flush with bottom before handle is If using boot, engage both depressed Insert in tool top & bottom latches Unassembling for re-termination.. Boot Removal.. Plug Pin Positions Flat...
- Page 4 Z-PLUG Termination – Alternate Cable types F/FTP & S/FTP F/FTP S/FTP S/FTP F/FTP & S/FTP F/FTP ~6.35 mm Solid (.25 in) ~6.35 mm (23 AWG) (Foil) (.25 in) ~51 mm (2 in) 4X (Foil) ~51 mm S/FTP (2 in) Note braid...
Need help?
Do you have a question about the Z-PLUG and is the answer not in the manual?
Questions and answers