command from the File menu.
4.7
Device Configuration Reference
Device configuration information is stored in flash memory and is read and
displayed in the properties section on the right side of the Installer window.
This section describes some of those options in detail.
4.7.1 E-mail Notification
E-mail notification setup can be done via Telnet, serial port, or Installer.
Domain Name: Domain name of your e-mail server.
MailServer: The IP address of the mail server.
Recipients: E-mail addresses of the recipients.
Triggers: Events that trigger an e-mail.
Unit Name: Name used by the ND-8511(D) to send e-mail messages. This
name and the Domain Name are combined to give you the e-mail address
of the sender.
To configure e-mail properly, you will need to make entries in the e-mail
recipient's collection, the e-mail triggers collection, Domain Name, Mail
Server, and the Network.
4.7.2 E-mail Recipients Collection
This collection contains the e-mail addresses of the e-mail recipient. When
you click on the Recipients field, a browse button appears. Click the button
to display the E-mail Recipients collection dialog box. Enter the E-mail
address for each recipient.
52 • Installer