disconnect
State LED off
with connection
Disconnect with
EOT
3.7.9 Flush Mode (Buffer Flushing)
Using this parameter, you can control line handling and network buffers with
connection startup and disconnect. You can also select between two different
packing algorithms.
Function
Input Buffer (Serial to Network)
Clear with a
connection that is
initiated from the
device to the
network
Clear with a
connection initiated
from the network to
the device
Clear when the
network connection
to or from the
device is
disconnected
Output Buffer (Network to Serial)
Clear with a
connection that is
initiated from the
device to the
network
Clear with a
connection initiated
from the network to
the device
Clear when the
network connection
to or from the
device is
disconnected
1
7
6
5
4
1
1
1
1
3
2
1
0
1
1
1
Configuration • 37