Advertisement
Table of Contents
Installations:
1.
Carefully unpack all materials and check that all pieces have arrived in
good condition.
2.
Locate the mounting plate and align it with holes on top of the cooler.
3.
Use provided hardware to secure the fan and the pump on top of the
mounting plate.
Attach cream mist line to ¼'' outlet of the pump. Push the tube firmly into
4.
the fitting. Attach the clear suction line to the inlet of the pump.
5.
Perform the priming procedure prior to use by Locating the Suction
hose that is inside the cooler, connect its ¾'' GHT fitting to an ordinary
garden hose, and turn on the water to flush out any air through the lines.
6.
Fill the cooler with drinking water. Take proper precautions and protect the
electrical components of the systems. Ensure that the suction hose is
properly seated at the bottom of the cooler with water-filled
COOLER-MAX
Advertisement
Table of Contents
Related Manuals for MistCooling COOLER-MAX MC32060
Summary of Contents for MistCooling COOLER-MAX MC32060
- Page 1 COOLER-MAX Installations: Carefully unpack all materials and check that all pieces have arrived in good condition. Locate the mounting plate and align it with holes on top of the cooler. Use provided hardware to secure the fan and the pump on top of the mounting plate.
- Page 2 Note: When filling a system, water quality needs to be considered. Poor water quality can affect the performance of the system. Sediment, hard water or other impurities can, over time, clog nozzles. Remove one nozzle from the center hub. Turn on the pump and run it to discharge air in the suction line and pump. This will also remove any debris from the mist line.
Need help?
Do you have a question about the COOLER-MAX MC32060 and is the answer not in the manual?
Questions and answers