Listening To The Tuner; Setting Tuner Presets - Klipsch CS-500 Owner's Manual

LISTENING TO THE TUNER

When you are in the Tuner Mode, the remote control can be used to tune radio stations. Use the FORWARD and REVERSE or the CHANNEL
button to change the frequency.

Setting tuner presets:

1.
Tune to the station you would like. Press and hold the PRESET button on the front panel of the controller for approximately three seconds and release.
You will see a number that signals the next available preset on the display. Press the PRESET button again to store the station.
2.
To change a preset you already have, tune to the preset station you want to change and follow step 1.
3.
There are twenty presets – 10 FM and 10 AM.
To access the tuner info banner, press
Frequency
Displays the
current station
TUNING MODE:
to various radio stations, press
icon highlighted (the tuning options appear). Use the
arrow button to highlight the option you want to use and
press ENTER.
SEEK:
stays tuned to it.
SCAN:
frequency—plays for several seconds and then
moves to the next station. To tune to a station
during scan, press
STEP:
at a time.
INFO on the remote control.
Presets
Accesses presets
Tuning
Options include
Seek, Scan, Step
and Presets
To access different ways to tune
ENTER with the Tuning
Goes to the next available station and
Previews stations throughout the
ENTER while it is playing.
Moves incrementally one frequency step
RDS
Radio Data
System
Ç
Å
PRESETS: Shows you the station number
for each of the presets available. Highlight the
Ç
icon and press ENTER or arrow to see list
and select.
RDS: RDS stands for Radio Data System and
enables broadcasters to embed information in
the signal. You can choose to turn this feature
on or off. Highlight this icon and press
Ç
or press the arrow to see list.
Ç
or
ENTER