Related Manuals for Knoll 21K
Summary of Contents for Knoll 21K
- Page 2 1) Read these instructions. 2) Keep these instructions. 3) Read all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Page 3 • • • To prevent electric shock, do not use the polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. The right to a claim against a public carrier can be forfeited if the carrier is not notified immediately in writing and if the shipping carton and packing materials are not available for inspection by the carrier.
- Page 4 Suggestion #1 Suggestion #2...
- Page 6 Warning: Under no circumstances should the round third prong on the plug be cut, bent or in any other way defeated as this may result in severe shock. Always turn off the amplifier and unplug the power cord before making any electrical connections.
- Page 7 Note: While most speaker manufacturers follow industry convention of using red terminals for positive connections and black terminals for negative, some manufacturers may vary from this configuration. To ensure proper phase connections, and optimal performance, consult the identification plate on our speaker terminals, or the speaker’s manual to verify polarity.
- Page 8 Le ft Speakers High Current R ight Power Amplifier 2-16 OHM SPEAK ERS Bridge switch must be in OUT postion. Connect speakers to RED terminals. Minimum speaker impedance is six (6) ohms. 1 2 VDC 45 mA Power Tri gg er In put connection.