Subscribe to Our Youtube Channel
Related Manuals for displayit GRAFFITI Plus
Summary of Contents for displayit GRAFFITI Plus
- Page 1 10x20 Inline Display Kit A Assembly Instructions displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019...
- Page 2 The triangular Repeat steps 4A-4C for all channel channel bar’s thinner edge goes bars as seen in the diagrams above. toward the inside of the frame. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019...
- Page 3 LED lenses facing forward. The hooks have an internal spring to allow them to stretch over the frame poles. Hook all four hooks. Repeat steps 6-8 for all curtain lights. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019...
- Page 4 13A. Install the back fabric reflector. Begin by tucking the corners and midway across the 13B. Complete installation of the fabric. top and bottom. The stitched edge of the silicone goes into the SEG channel first. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343...
-
Page 5: Door Assembly
The door connection points will slide into the highlighted channels. 12. Secure the door straps to the frame using the screw on caps. Please ensure that the screw caps are secured in the center hole of the corner hubs. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019... - Page 6 The Door Hinge Pins should face upward and the Magnetic Catch should be centered on the vertical of the opposite frame. Ensure that the Door Hinge Pins are tightened onto the frame. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343...
- Page 7 Door Hinge Pin in place and resecure. Lastly, install the door handle on the center of the opposite vertical of the door. Align the Door Handle to the Magnetic Door Catch. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343...
- Page 8 U-Connecter. The connector will be used on the tops of the two frames and should only be placed after the graphics have been installed. U - Connector displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019...
- Page 9 G. Complete installation of both center of the graphic on the front of the frame. and the middle of the bottom/front. endcaps. C. Tuck the graphic into the right endcap. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019...
- Page 10 1 by installed. Assembly is the same for any size pulling up at both corners. Pull with even pressure. StoreFront Shelf Rack. Flip the part and repeat to remove tube 3. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019...
- Page 11 To watch an assembly video scan the QR code, or go to https://youtu.be/-q1oFJMylAA Pull graphic straps around back of Attach interior shelving to Velcro counter and attach hooks. strips inside of counter. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019...
-
Page 12: Bottom Layer
Top Layer Fabric graphics and light blockers (in plastic bags) Endcap Channel Bars Frame Smaller channel bar bag Larger channel bar bag 2 padded light bags 2 padded light bags displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019... - Page 13 Backlit graphic frames (black) will also include a blockout graphic for the back of the frame to prevent light bleed. displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343 Updated 3/15/2019...
Need help?
Do you have a question about the GRAFFITI Plus and is the answer not in the manual?
Questions and answers