Greenlee 849 Operation, Service And Parts Instruction Manual
  1. Manuals
  2. Brands
  3. Greenlee Manuals
  4. Heater
  5. 849
  6. Operation, service and parts instruction manual

Greenlee 849 Operation, Service And Parts Instruction Manual

1/2" - 2" electric pvc heater
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION, SERVICE AND PARTS
For additional copies
at no charge
order 999 6045.1
1/2" - 2" ELECTRIC
1.
Read and understand all operating instruc-
tions before using.
2.
This unit is designed to heat PVC conduit only.
Do not use for any other purpose.
3.
Operate unit on firm, flat, dry surface. Do not
expose heater to rain or snow.
4.
Keep volatile or combustible material away
from the heater while in use.
5.
Operate unit only in a well ventilated area.
6.
Connect the heater to a grounded power
source of equivalent rating (120 V.A.C., 20
amp, 60 cycle).
999 6045.1
INSTRUCTION MANUAL
849
PVC HEATER
SAFETY FIRST
© 2019 Greenlee Tools, Inc.
7.
Recommend use of a 20 amp G.F.C.I. Safety
Cord or Adaptor.
8.
Wear gloves when operating this unit. When
opening and closing cover, use the attached
handles.
9.
When not in use, turn heater off to reduce the
possibility of accidental burns.
10. Never leave conduit in heater unattended, as
conduit will become scorched.
11. Calrod element temperature 1000° F (540° C).
IM-849 REV 7 9/19

Advertisement

Table of Contents
loading

Related Manuals for Greenlee 849

Summary of Contents for Greenlee 849

  • Page 1 Operate unit only in a well ventilated area. 11. Calrod element temperature 1000° F (540° C). Connect the heater to a grounded power source of equivalent rating (120 V.A.C., 20 amp, 60 cycle). 999 6045.1 © 2019 Greenlee Tools, Inc. IM-849 REV 7 9/19...

  • Page 2: Table Of Contents

    To help prevent kinks or wrinkles when making 90 degree bends in 2" PVC duct, use 2 Greenlee No. The Greenlee No. 849 Electric PVC Bender is designed to 30976 PVC Plugs to trap the air in the conduct and help provide a single operator with an effective and easily keep the PVC from flattening or kinking.

  • Page 3: Operation

    849 1/2" - 2" ELECTRIC PVC HEATER OPERATION 1. Set Up - Connect unit to power source (120 Volts, AC, Keep a close watch on the PVC and keep close track 60 cycle). Turn switch to on position (built-in pilot light of the time to prevent scorching of the conduit.

  • Page 4: Exploded View - No. 849

    849 1/2" - 2" ELECTRIC PVC HEATER Exploded View No. 849 2" Electric PVC Bender Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 5 849 1/2" - 2" ELECTRIC PVC HEATER Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...

  • Page 6: Parts List - No. 849

    849 1/2" - 2" ELECTRIC PVC HEATER Parts List No. 849 2" Electric PVC Bender CONTROL NO. DESCRIPTION QTY. 502 7773.1 Cover Unit (Key No's. 2, 3, 39, & 4 of Key 41) 502 7766.9 Reflector, Cover 905 2976.6 Handle, Davies #692 Heat Resistant Black Plastic 502 7775.8...

  • Page 7: Wiring Diagram

    849 1/2" - 2" ELECTRIC PVC HEATER Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 8 Greenlee Tools, Inc. 4455 Boeing Drive, Rockford, IL 61109-2988 USA 800/435-0786, in Illinois call 815/397-7070 Fax: 815/397-1865 Service: 800/435-2932, Canada: 800/233-5924 Printed in U.S.A.

Table of Contents