Operation is possible only in a dry environment. Disclaimer: Use of the GC 055 communicator is at the discretion of the user. LEVEL, Ltd. shall not be liable for any damage arising from the use of this communicator. 2. Safety We recommend you follow these tips in order to prevent damage to property or injury to persons.
5. Design The GC 055 design is in a plastic box suitable for mounting on a TS 35 DIN-rail. If the GC 055 is placed in a metal cabinet, the GSM antenna must extend outside the cabinet. The antenna cable...
Expander 8 outputs, open collector, max. 200 mA, width 3 modules ED 055 314 Expander 4 relay outputs, 230 V / 5 A 5.2. Dimensions The width of the GC 055 is three modules on a TS 35 DIN rail.
5.3. Front panel The front panel of GC 055 is equipped with seven LED indicators. The 'Action' LED is controlled by the configuration. The 'GSM' LED indicates the GSM status (Section 7.2). LED 1-4 indicates state of output - the LED is lit when the output is active, the output is earthed.
A mini USB connector located under the front panel cover is used to connect the GC 055 to a PC. Before connecting the GC 055 to a PC, the software - Level Utility - must be installed on the PC, which can be downloaded from the manufacturer's website (www.level.systems - "Downloads"...
Example of configuration - sending SMS with text "Alarm" to phone number 777888999 at rising edge of pulse on input 1. 8. SMS - editing configuration - control Via SMS you can't create a new configuration for the device, but only edit the existing configuration for the device (eg phone number in the phone book).
Page 10
Reply CALLR @IP_adresa,port,UDP,1 After receiving the SMS GC 055 will send UDP packets to the IP address and port. The IP address must be a fixed and public, routeable port to the PC where the conenction is to be made. The port must be enabled in the firewall on the PC. In the Control Panel, you need to wait for connections on the appropriate UDP port.
"Level Utility" at www.level.sytems in the "Downloads" section. In the IDE - Control panel software, establish a connection to the GC 055 via USB cable or GPRS and perform a firmware update in IDE - Unit Control - Upgrade firmware. Before performing the firmware...
Warranty repairs will be made within ten working days from receipt of the defective goods in LEVEL, provided that the spare parts are in stock. If not, the user will be offered an alternative solution until the repair is completed.
Warranty certificate Name of Product : Type : Serial number : Date of purchase: Distributor : Address, telephone No., stamp : Signature: Accepted for repair Despatch date Description of fault...