La Crosse EXECUTIVE ATOMIC CLOCK 3.0 Quick Start Manual

EXE C UTIV E
ATOMIC CLO CK 3.0
MODEL: 513-21867 (513-1429BL)
P OWER U P
1. Install 2 "AA" batteries into your Outdoor Sensor.
2. Insert the 5V power cord into an outlet, then into
your Atomic Clock. Optional: Insert 6 AA batteries
for backup. Note: Power cord is required for
constant backlight.
3. Once the sensor is reading to your clock, place
it outside in a shaded location to protect it from
the sun's heat. See our mounting information:
bit.ly/temp_mounting
TX141TH-Bv3 513-21867
Outdoor Sensor (513-1429BL)
Atomic Clock
W W VB ATOM IC T IM E S IGNA L
• The station will automatically search for the Atomic
Time Signal at power up and again at UTC 7:00,
8:00, 9:00, 10:00, and 11:00.
• Press and release the button to manually search
for the WWVB Atomic Time Signal.
• The Tower Icon will flash while searching, and be
solid on screen when the signal is received.
• For information about WWVB Atomic Time visit:
bit.ly/AtomicTime
BUT TON FUNC T I ONS
Press to search for Atomic Time Signal.
Hold to enter Settings Menu.
Settings: Press to adjust settings. Hold to adjust quickly.
+ (PLUS)
Hold to search for Add-on Sensor.
Settings: Press to adjust settings. Hold to adjust quickly.
- (MINUS)
Press to switch between Desired Time or Local Time.
Hold to adjust your Desired Time hour.
Press to adjust the information displayed: Time, Desired Hour,
Temperature... etc. The Auto-Scroll
Press to select Calendar Display.
Press to Adjust Backlight.
Settings: Press to exit Settings Menu.
SE T T INGS
1. Hold the button to enter the Settings Menu.
2. Use the + or - button to adjust values.
3. Press the button to confirm and move to next
item.
4. Press the button at any time to exit.
Settings order:
• Language (English, Spanish, French, German)
• Beep ON/OFF
• Atomic ON/OFF
• DST AUTOMATIC/ DST ALWAYS OFF / DST ALWAYS ON
(Change Spring/Fall) (No change in Spring) (No change in Fall)
• Time Zone
• 12/24 Time Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date or Date/Month
• Fahrenheit/Celsius
Language: The language selected in this menu will adjust
the Weekday readout and menu items.
Atomic OFF: If Atomic OFF is selected, menu will skip DST
and Time Zone settings and move straight to the 12/24
Hour Format setting.
Weekday: The Weekday sets automatically when Year,
Month and Date are set.
ADJUSTA BL E BACKLIGHT
When using the power cord, press the
adjust your backlight brightness. There are 4 levels
plus an off option.
D E SIRE D HOUR ( TIM E ADJUST )
Have your clock match other times around the
world by setting a Desired Hour, kept accurate by
the Atomic time signal. Note: only the hour can be
changed.
Set Desired Hour:
Icon will show when active.
1. Hold the
Hour " will show.
2. Press the + (PLUS) button to adjust the hour. Press
the - (MINUS) button to reset hour to "Local Time".
3. Press the
Switch between Desired Time and Local time:
• Press the
Time and Local Time.
• Desired Time is indicated with the
SET DESIRED HOUR
Note: In the event of battery change or reset, these
settings will need to be readjusted.
TIME ZONES
ATLANTIC
CALEN DAR DI SPLAY OPTIO NS
EASTERN
CENTRAL
Press the
MOUNTAIN
displayed. Full Weekday, Month/Date/Year, Weekday/
PACIFIC
Month/Date.
ALASKA
HAWAII
C U STO M T I M E / T E MP E RAT U RE D I S P LAY
Press the
screen. When the Auto-scroll Icon
button to
clock will switch between these options every 5
seconds.
button until the Hour flashes, " Desired
button to confirm and exit.
button to switch between Desired
icon.
VIEW DESIRED HOUR VIEW LOCAL TIME
button to change how the Calendar is
button to adjust the data displayed on
is showing, the