Table of Contents
Advertisement
2. While inserting a thin plate to press down a claw, push the rear of
the key forward to disengage the key claw from the chassis.
3. Lift the key up to remove it.
Note:
- The key claw is easily broken. Do not apply undue force. Should a
key claw break, it can still be used.
- If a black key is to be replaced, it is necessary to remove both
adjacent white keys.
/ / / /
Assembly
1. Insert the front part of the key into the chassis.
2. Insert the plate spring into the hammer notch as shown in
13.
3. While slowly lowering the key into the chassis, insert the plate
spring into the notch at the rear of the key.
4. Carefully insert the key into the opening in the chassis and slide
the key towards the rear to lock it in place.
Figure-12
Figure-13
11
Figure-
Advertisement
Table of Contents
