G&G T3X Quick Start Manual

T 800.285.6780 E support@ggled.net
www.ggled.net
COLOR CHANGING LED ARCH LIGHTING
The T3X Wireless Remote Control offers intelligent, user friendly control of your color changing arch lighting
system. This remote allows you to:
• Sync and control all of your arch
T3X
lights together
LED RGB Programmable Controller
• Select between unique static colors
via a full color wheel or 32 built-in
color changing models
• Easily adjust both speed and
brightness settings
• Create custom, unique color
changing programs
T3X remote works with T3-CV, T3-CC, T3-5A receiver.
T3X can realize the signal sync on unlimited receivers within effective

Wiring the LED Fixture to the Receiver

distance, a very good solution for the LED project needs sync control
wirelessly.
See the below diagram and corresponding table to wire the LED Fixture to the T3-CC Receiver.
Can RF remote the functions of switch, pause, mode, speed and LED
brightness. More proudly, the T3X has the brand-new programmable
function, only 10 seconds to DIY a new change effect.
Programming has never been so easy.
Leader Cable T3-CC Receiver
Black V+
White B
Green G
Red R

Syncing/Pairing the Receiver(s) to the Remote

To pair, turn on both the receiver and remote. The receivers are located in the forward facing junction box on
each vac stanchion. Press the "ID learning button" on the T3-CC receiver then press and hold any key (except
On/Off) on the remote. The receiver will beep and the remote indicator light will flash green 3 times upon a
successful pairing. To control multiple receivers simultaneously, follow the steps above for each receiver.
STRONG.
C Terminal of Rec eiver s:
Running Light
Remote ID
Learning Button
5~ 24V dc
Power Input
Sock et
Running Light
— 26 —
Remote ID
Learning Button
SIMPLE.
WIRING DETAIL QUICK START GUIDE

1. Operation Panel and Component Instruction:

Touch Full-color Circle
Speed Keys
Mode Keys
Scene-mode Keys
LED Lamp
(Press 3 seconds to save)
Connected Sock et
(Press"PLAY" to play cycle modes.
merely play the dynamic effect,
the static effect will be skipped)
DIY Key for Color Selection
DIY Key for Color Selection
CV CONTROLLER
Long press for 2 seconds to enter DIY programming function.
●
1. Select any color on , the controller will save immediately.
2. Press to enter next color. (can save 1-10 colors)
3. After color selection, press to switch jumping/smooth/flickering changing effect.
T3-CV
4. Adjust the brightness and the speed by pressing the "SPEED" and " BRT".
5. Save the new program into the "Scene-mode keys".
Additional Functions:
●
▲
Long press "DIY key for color selection"
▲
Press "MODE" key under DIY function, can display the standard color for black,
red, green, blue, yellow, purple, cyan and white. Among them, black can be used
for editing fade in dimming effect, etc.
★Buzzer on/off: Press "Scene-mode Key"
T3-CC Receiver
COMPACT.
LED RGB Programmable Controller
Sync Status
Indicator Light
Brightness Keys
12~ 24V dc
On/Off
Switch Key for
Changing Modes
On/O
to clear the current color.
for 3 seconds.
Leader Cable
Black
to LED Fixture
White
Green
Red
T 3- 5A
— 5 —
Rev Date 21 0512
Pow