Draco Supra-Bender 200 Manual

Manual Supra-Bender
Read, observe and follow this manual
and the other applicable documents,
especially all safety instructions and
warnings.
Supra-Bender with O-handle
in 200 or 350 mm length
Item no.: Bending 0º- 120º
91550 Supra-Bender 200, with O-handle
91550S3 Supra-Bender 350, with O-handle
91550S1 Supra-Bender 200, without O-handle
91550S4 Supra-Bender 350, without O-handle
Item no.: Accessories
91549-1 Adapter Set (adapter + handle)
to connect two Supra-Benders and
ensures a convenient grip
KH70400 O-Handle for Supra-Bender

Technical data

Max thickness of materials:
Copper / zinc / aluminium
Galvanized steel
Stainless steel / Uginox
Bending height:
Min. bending height
Max. bending height
Max Draenert Apparatebau GmbH & Co. KG
Gutenbergstrasse 15-17
D-73779 Deizisau
up to 1.00 mm (19 ga.)
up to 0.70 mm (22 ga.)
up to 0.50 mm (25 ga.)
from 30 mm
up to 200 or 350 mm
Phone:
Fax:
E-mail:
Always wear protective gloves!
Handle tool carefully and protect
against dirt. If necessary lubricate
shafts (e.g., sewing machine oil).
Supra-Bender without O-handle
in 200 or 350 mm length
Bending height
30 – 200 mm
30 – 350 mm
30 – 200 mm
30 – 350 mm
+49-(0)7153-82170
+49-(0)7153-821766
info@dracotools.com
kg
1,8
2,2
1,5
1,9
kg
1,5
0,3