Summary of Contents for Dominator Smart Phone Control Kit
Page 1
QUICK SETUP GUIDE DOMINATOR SMART GARAGE ACCESS The Smart Phone Control Kit works via your home’s WiFi network. Initial set up involves linking your phone app, smart hub and device (e.g. garage door opener) to your home network so that you can reliably operate your door from the app.
Page 2
Click on “Next” button for 5 seconds, release when the LEDs flash, wait for the button to have a solid purple light. Click on “Next” SMART PHONE APP | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominator.co.nz...
Page 3
– press it to continue phone app - press join Setup the details on your device Complete your details Enter your WiFi network details Click on “Next” SMART PHONE APP | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominator.co.nz...
Page 4
Firmware now updated, click on “Next” networks and your phone reconnects firmware, please wait to a different network to your hub you may see the above message SMART PHONE APP | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominator.co.nz...
Page 5
If using a QR code press “OK” to connect your opener to registration code manually so that you can scan it (If you have multiple hubs) SMART PHONE APP | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominator.co.nz...
Page 6
– i.e. Left Garage and press “Next” from the app and press “Done” now ready to use. Press “Okay” to view your opener dashboard SMART PHONE APP | For a free measure and quote call 0800 DOMINATOR (366 462) www.dominator.co.nz...
Need help?
Do you have a question about the Smart Phone Control Kit and is the answer not in the manual?
Questions and answers