Subscribe to Our Youtube Channel
Related Manuals for amiad TAF-750
Summary of Contents for amiad TAF-750
- Page 1 AMIAD Water Systems Ltd. 3" TAF-750 FILTERS Serial number: Order number: Catalog number: Filtration degree: Tested by: Installation, Operation and Maintenance Instructions Ref. 910101-000116 /12.2018...
- Page 2 Amiad assumes that all users understand risks involved within this file and/or its attached materials. This document is given in good faith and is not intended to impose any obligation to Amiad. While every effort has been made to ensure the information in this manual is accurate and complete, we would appreciate if you can bring any errors or omissions to the knowledge of Amiad or consult Amiad experts or its authorized representatives if you have any questions.
-
Page 3: Table Of Contents
PARTS SCHEDULE - 3" TAF-750 FILTER SECTION 1 ......................11 PARTS DRAWING - 3" TAF-750 FILTER SECTION 1 ......................13 PARTS SCHEDULE & DRAWING 3" TAF-750 FILTER SECTION 2 ..................14 CONTROL DRAWING ............................... 15 AMIAD LIMITED WARRANTY ............................16 With any inquiry please quote Filter Serial Number, located on the filter housing. -
Page 4: Technical Specifications
TECHNICAL SPECIFICATIONS General 3" Maximum flow rate /h; 220USgpm Consult manufacturer for optimum flow depending on filtration degree & water quality. Min. working pressure 1.5 bar; 22psi Or lower if pressure is increased for flushing. Max. working pressure 8 bar; 120 psi Filter area 700cm ;... -
Page 5: Safety Instructions
SAFETY INSTRUCTIONS General Prior to installation or any treatment given to the filter, read carefully the installation and operation instructions. While maintaining the filter all standard safety instructions should be observed in order to avoid danger to the workers, the public or to property in the vicinity. -
Page 6: Dimensional Drawings
DIMENSIONAL DRAWINGS INLET OUTLET DRAIN 11.50 * Approx. Required Height For Maintenance 3” TAF 750 12.2018 / 910101-000116 Page 6 of 17... -
Page 7: Description Of Filter Operation
DESCRIPTION OF FILTER OPERATION The "TAF" is a sophisticated yet easy-to-operate automatic electric filter, with a self-cleaning mechanism driven by an electric motor. The filter is designed to work with various types of screens in filtration degrees from 500 to 10 micron. Filtering process The water enters through the inlet pipe into the screen area and flows through the screen from inside out. -
Page 8: Installation
INSTALLATION Design recommendations 1. The filter requires 5.7m /h (25USgpm) for flushing, in addition to the working flow rate at a minimum pressure of 1.5 bar (22 psi). In the event that the system cannot provide the flushing flow in addition to the working flow, at the minimum required pressure, a hydraulic valve should be installed downstream of the filter. -
Page 9: Start- Up And First Operation
START- UP AND FIRST OPERATION 1. Set the controller to 16 seconds flushing time and 2-4 hour intervals. 2. Operate a "dry" flushing cycle. Verify proper operation of the controller, the motor and the solenoid valve. 3. Open the inlet valve to the filter, while the outlet valve remains closed or with an open by-pass valve (This will keep the flow in the filter at a minimum), and operate a flushing cycle by pressing the push-button on the controller panel. -
Page 10: Maintenance
2. Close the inlet valve to the filter and release the pressure. 3. Remove all drain lines from the valves, drain, and reconnect. Leaks In case of a leak contact Amiad technical support 3” TAF 750 12.2018 / 910101-000116 Page 10 of 17... -
Page 11: Parts Schedule - 3" Taf-750 Filter Section 1
PARTS SCHEDULE - 3" TAF-750 FILTER Section 1 Cat. Num. Description Material 710103-001269 Housing 3" TAF-750 BSPT Machined NYLON 710103-001271 Housing 3" TAF-750 NPT Machined NYLON 700190-001924 Pressure Balancing Assembly 3" TAF-750 Various 770102-000092 O-Ring Seal P2-125 Scanner Bearing NBR"S"... - Page 12 Cat. Num. Description Material 710103-001204 Drive Unit Cover TAF Various 710103-004837 Sling For AMIAD Controler AC-DC6_GL-TAF S/ST 304L 720101-000475 Electronic Control DC-6V 6-Out 1-In AMC-6 Various 720101-000476 Electronic ontrol 110VAC 6-Out 1-In Galcon Various 760101-000713 Phillips Pan Machine Screw M5X8 S/ST316...
-
Page 13: Parts Drawing - 3" Taf-750 Filter Section 1
PARTS DRAWING - 3" TAF-750 FILTER Section 1 3” TAF 750 12.2018 / 910101-000116 Page 13 of 17... -
Page 14: Parts Schedule & Drawing 3" Taf-750 Filter Section 2
PARTS SCHEDULE & DRAWING 3" TAF-750 FILTER Section 2 Cat. Num. Description Material 700190-001935 Suction Scanner W/O Shaft (2"S/3" TAF) Various 710101-000751-1 2"-4" Suction Scanner Nozzle No.1 710101-000751-2 2"-4" Suction Scanner Nozzle No.2 760101-000537 Phillips Pan Tap Screw PT4x20 S/ST316... -
Page 15: Control Drawing
CONTROL DRAWING 3” TAF 750 12.2018 / 910101-000116 Page 15 of 17... -
Page 16: Amiad Limited Warranty
Distributor may not return the Defective Product unless such return was coordinate and approved by Amiad in advance. Amiad's obligation under this warranty shall be limited to, at its option, the repair or exchange, free of charge, of the Product or any part which may prove defective under normal use and service during the Warranty Period. - Page 17 Amiad Water Systems Ltd. D.N. Galil Elyon 1, 1233500, Israel Tel: +972 4690 9500 | Fax: +972 48141159 | Email: info@amiad.com Obelis s.a. Bd Général Wahis 53, 1030 Brussels, Belgium. Tel: +(32) 2732 5954 | Fax: +(32) 27326003 | Email: mail@obelis.net...
Need help?
Do you have a question about the TAF-750 and is the answer not in the manual?
Questions and answers