Advertisement
Location of Devices
Transmitters (POEXTX1)
Panduit recommends placing the transmitters (POEXTX1) near the switch. The ideal deployment would be to place the
transmitters in the panels (POEXPANEL-BL and POEXPANEL-WH) which are designed to mount in the rack. These can
then be patched using a short patch cord as shown in Figure 5.
Note that when using the POEXPANEL products, Panduit recommends using the POWER-190W power supply which can
be mounted to the panel and power up to four POEXTX1 devices.
Figure 5: Multiple POEXTX1 mounted in the POEXPANEL near the Switch.
Receivers (POEXRX1 and POEXRX4)
Panduit recommends placing the receivers (POEXRX1 and POEXRX4) within 50 feet of the powered device. If these are
required to be located outdoors, they must then be placed in a NEMA-rated enclosure. If external power is needed,
ensure the enclosure or location can accommodate either the POWER-60W or POWER-110W power supply.
8
Advertisement
