Advertisement
Part Selection Guide
All deployments will require:
● (1) Transmitter
● (1) Receiver
● (1) Power supply if the switch cannot provide enough power to transmitter (we recommend at a minimum,
a PoE switch that can provide 50 W of power for power transmission; any PoE switch will work if only
data transmission is required)
There are a few notes about accessories and kits below.
● The kits include a power supply, so an additional power supply is not needed
● If the –NP option is ordered, the customer will need a power cord as well; ensure it is correct for the region
● Use POWER-60W for the 1-port transmitter or receiver
● Use POWER-110W for the 4-port receiver, if more power is needed than the 60 W can supply
● Use POWER-190W when using the POEXPANEL; this can power up to (4) 1-port transmitters or
receivers and mounts to the panel
Refer to Table 5 for a list of the Panduit PoE Extender Parts and Kits and Table 6 for Panduit PoE Extender Accessories.
10
Advertisement
