Nordson EFD 7860C-RS Installation Manual

7860C-RS Radial Spinner System
Installation Guide
Introduction
The 7860C-RS radial spinner system is a precision, air-actuated spinner
device that produces a narrow radial output band ideal for coating the
interior walls of cylindrical shaped parts. Air pressure is released to the
colleted air motor to spin the radial disc and shaft assembly. During this
radial spin cycle, fluid is dispensed onto the spinning disc, causing it to
be distributed in a narrow band-like pattern onto the side wall.
The spinner disc and shaft assembly have a shaft length of 70 mm
(2.75"), with disc sizes ranging from 9 mm (0.354"), 12 mm (0.473"),
15 mm (0.590"), and 19 mm (0.745"). The radial spinner system is easy to
use and will operate for many millions of cycles without maintenance.
Bracket
7860C
air motor
Shaft / disc
assembly
Electronic pdf files of Nordson EFD
manuals are also available at
nordsonefd.com
752V-UHSS
valve
Tip