Page 1
Operating Instructions Digital pasture fence voltage tester 580580479 These operating instructions must be read thoroughly before use and followed. These Operating Instructions must be retained for future reference. Translation of the original operating instructions...
Instructions for Digital Fence Tester 580580479 Table of contents About these operating instructions and symbol descriptions ........3 Safety and accident prevention rules ..............3 General safety instructions ................3 Specific safety instructions ................4 Personnel qualifications .................. 5 Intended use ......................
Instructions for Digital Fence Tester 580580479 About these operating instructions and symbol descriptions The information in these Operating Instructions is labelled as follows: Incorrect operation can lead to serious injury or death. Incorrect operation or negligence may result in personal injury or damage to property.
Instructions for Digital Fence Tester 580580479 If during operation (residual) hazards and risks become apparent which are not described in this manual, the operator is obliged to report this to the manufacturer. Failure to observe the following safety instructions can lead to serious...
Instructions for Digital Fence Tester 580580479 Personnel qualifications Persons using this equipment must be familiar with the 5 safety rules (1 Disconnect, 2 Secure against reconnection, 3 Check that no voltage is present, 4 Earth and short-circuit, 5 Cover live adjacent parts) and use the voltage tester in accordance with safe working practices.
Instructions for Digital Fence Tester 580580479 Operation An electric shock can lead to death or serious injury! The equipment may only be used by instructed persons who observe all safety instructions. Electric shock due to insufficient insulation. Always check the equipment for damage and proper functioning before each use.
Instructions for Digital Fence Tester 580580479 Voltage test Insert the earth spike (4) into the ground. Hold the test probe (1) against the fence wire Press the push button (3) permanently to perform a measurement. Read the measured value on the display (2). e.g. 6.0 = 6,000 V...
Instructions for Digital Fence Tester 580580479 • Fasteners must be regularly checked for tightness, and tightened as necessary. • Clean the equipment with a damp, soft, lint-free cloth. Make sure that no moisture penetrates into the housing. Do not use any sprays, solvents, cleaning agents containing alcohol or abrasive cleaners, but only clear water to moisten the cloth.
The manufacturer, Wilhelm Fricke SE Zum Kreuzkamp 7 DE-27404 Heeslingen hereby declares on its sole responsibility that the digital pasture fence voltage tester Type/series identification: 580580479 is in conformity with the provisions of 2014/30/EU Directive on electromagnetic compatibility 2011/65/EU Directive on the restriction of the Use of Certain Hazardous...
Instructions for Digital Fence Tester 580580479 10 Warranty The warranty terms of Wilhelm Fricke SE, as can be found in the sales documents and the current version of the Terms and Conditions, apply. In case of questions, please contact the company’s customer service line.
Need help?
Do you have a question about the 580580479 and is the answer not in the manual?
Questions and answers