Silicone Heads And Activating Cleansers - nuskin ageLOC LumiSpa iO LS2R User Manual

EN

SILICONE HEADS AND ACTIVATING CLEANSERS

ageLOC LumiSpa iO offers a choice of silicone heads and a selection of
activating cleansers, so you can find the best combination for your skin.
Silicone Heads
Each ageLOC LumiSpa iO silicone head features a gentle, nonabrasive silicone
face. There are three Silicone Head options available:
Gentle
sold separately
Silicone Head Replacement Reminder
Each ageLOC LumiSpa iO device has the ability to track Silicone Head usage.
Additional details regarding optimal Silicone Head replacement timings can be
found in the app. When it's time to replace the Silicone Head, the ageLOC®
LumiSpa® iO will prompt you at the end of an application. Additional details
about Silicone Head replacement can be accessed in the app.
ageLOC® LumiSpa® iO Accent (sold separately)
ageLOC® LumiSpa® iO Accent is an attachment with a soft silicone tip that
gently improves the appearance of the delicate area around the eyes. Pair with
ageLOC LumiSpa IdealEyes twice daily. See the ageLOC® LumiSpa® iO Accent
quick start guide for more information.
Activating Cleansers
ageLOC LumiSpa activating cleansers were specifically formulated for use with the
ageLOC LumiSpa iO to provide unique, skin-beneficial application and to target
specific skin types. Activating cleansers should be chosen by personal preference
and/or by skin type—Normal/Combo, Dry, Oily, Sensitive, Blemish-prone.
Caution: ageLOC LumiSpa iO products have been carefully designed to work
exclusively with the device and Silicone Heads. Using products other than
those recommended for use with ageLOC LumiSpa iO may result in unfore-
seen damages to the device and/or Silicone Heads.
6
Normal Firm
sold separately
ATTACHING AND REMOVING
YOUR SILICONE HEAD
1
2
EN
Attaching your Silicone Head
• Grip the sides of the Silicone
Head.
• Align the hole on the back of the
Silicone Head surface with the
rotating axle on the ageLOC®
LumiSpa® iO.
• Gently press the head onto the
axle until it clicks.
• The device automatically
recognizes which Silicone Head
is attached and, if applicable,
automatically adjusts your
application timing.
Removing your Silicone Head
• Grip the sides of the Silicone
Head.
• Gently lift the top of the Silicone
Head and pull until it releases.
7