Hardi 3570 Manual page 27

Speed transducer
Speed transducer is
fitted as shown. Hole
size is 4.5 mm.
Magnets must be placed
an equal distance (and
at least 150 mm) from
one another.
Recommended number
of magnets fitted are as
follows:
4.5 mm
Tractor front wheel (rim size up to 20") ----- 4
Tractor rear wheel (rim size over 20") ------- 6
Transmission driveshaft ----------------------- 1
The south side of the magnet must
face the transducer.
Distance between them must be 5
to 7 mm.
S
N
Flow transducer for BK operating unit
For BK operating unit, a mounting set is available
(HARDI ref. no. 833696).
1. Disconnect hoses.
27