Table of Contents Introduction Features Package Contents Specifications Operation Controls and Functions EDID Mode Application Example Thank you for purchasing this product Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this prod- uct.
Page 3
Registration Page Please Activate your warranty by registering our product through the link below - www.orei.com/register Technical Support Need Help? Our experienced Technical Support Team is here for you to answer your questions, give technical advice or help troubleshoot your project to get you installed on time and on budget.
Introduction This HDMI 1x8 Splitter can distribute 1 HDMI source signal to any 8 display devices. Support video resolution up to 4K2K@30Hz 4:4:4. It is designed with1 HDMI input, 1 HDMI loop output and 8 CAT outputs. The HDMI signal transmission distance can be extended up to 131ft / 40 meters at the resolution of 4K30Hz, or 230ft / 70 meters at 1080P@60Hz via a single CAT6 cable.The product supports one-way IR control signal pass-through and...
Features HDMI 1.4 and HDCP 1.4 compliant Video resolution up to 4K2K@30Hz(4:4:4) 8-bit Support audio formats: LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio Extend the signal transmission distance up to 131ft / 40 meters at the resolution of 4K30Hz, or 230ft / 70 meters at 1080P@60Hz via a single- CAT6 cable Support 1 HDMI input, 1 HDMI loop output and 8 CAT outputs.
Operation Controls and Functions Splitter POWER CAT OUT8 CAT OUT7 CAT OUT6 CAT OUT5 CAT OUT4 CAT OUT3 CAT OUT2 CAT OUT1 HDMI OUT HDMI IN IR OUT EDID UPDATE DC 12V POWER 7 8 9 10 11 Name Function Description POWER LED When the Transmitter is powered on, the red power LED will be on.
Page 9
Operation Controls and Functions Name Function Description EDID DIP Used to set EDID mode. Please refer to Section “6. Switch EDID Mode” for details. UPDATE Mini USB update port. Connect to PC for firmware updating. DC 12V DC 12V Power input port. POWER Press the switch to power on/off the device (“-”...
Page 10
Operation Controls and Functions Wideband IR (20KHz---60KHz) introduction IR RECEIVER IR BLASTER IR Cable Pin Assignment Control local device (Blu-ray player or DVD player, etc) from remote: The IR Re- ceiver is connected to the receiver IR in port. The CAT output connector on the HDMI Splitter is connected via CAT6 cable to an HDMI receiver.
EDID Mode The defined EDID setting list of the product is shown as below: Position EDID Description Position EDID Description 1080p, 2CH AUDIO 3D,1080P, HD AUDIO 1080p, DOLBY/DTS 5.1 4K30, 2CH AUDIO 1080p, HD AUDIO 4K30, DOLBY/DTS5.1 1080i, 2CH AUDIO 4K30, HD AUDIO 1080i, DOLBY/DTS 5.1 Copy Loop Out...