Page 2
833-926-2323 CAUTION 8: The spa should not be setup or le out in temperatures lower than 4°C (40°F) CAUTION 9: To avoid damage to the spa. Hea ng func on and Bubble func on can't operate at the same me.
Page 3
SKU NO. HTIO2BLD SKU NO. HTIO2BKW Color Blue Color Black & White Number of people: Number of people: Water capacity: 550L/145 gallons Water capacity: 550L/145 gallons External diameter: L 1.90 m/75”;W 1.20 m/ 47" External diameter: L 1.90 m/75”;W 1.20 m/ 47"...
Page 4
SKU NO. HTIR4WHBK SKU NO. HTISQ4BR Color Black & White Color Brown & White Number of people: Number of people: Water capacity: Water capacity: 800L/211 gallons 600L/158 gallons 1.80 m/71" 1.50 m/59" External diameter: External diameter: 1.40 m/55" 1.10 m/43" Internal diameter: Internal diameter: Height:...
Page 5
SKU NO. HTIR6GYBR SKU NO. HTISQ6GYBK Color Brown & Gray Color Black & Gray Number of people: Number of people: Water capacity: Water capacity: 1000L/264 gallons 950L/252 gallons 2.08 m/82” 1.85 m/73” External diameter: External diameter: 1.60 m/63” 1.50 m/59” Internal diameter: Internal diameter: Height:...
PRIOR TO ASSEMBLY Ensure All Parts are Present: d. Filter Cartridge h. Ground Sheet a. Spa Pool i. Safety Locking Clip Keys b. Clip-on Top Cover e. Filter Cartridge cover c. Inflation Hose f. Drainage Plug g. Repair Patches d&e IMPORTANT: •...
Page 7
ASSEMBLY 1. Unfold the spa from the packaging. Spread the spa on the Ground Sheet (Part h) provided.Make sure that the surrounding sharp objects are cleared. Figure 1 2. Open the air outlet on the spa. Screw one end of the inflation hose into it (Fig. 2). 3.
Page 8
inside Clip on the top cover (Part b)to retain heat, and lock clips with the Safety Locking Clip Keys (part i) Before using, fill the SPA with water between the “Min/ Max” lines. When the FILTER PUMP has worked for 168 hours, the le on the display screen.
Page 9
HEATER Key - On/Off key for the hea and the red indicator lamp will be on. Press again and the hea FILTER key will also be on turn off. When the hea and the filter pump will start working as well. When the hea will be con occurrence required by the design.
MAINTENANCE 1. Maintaining Spa Water • The water should be changed every few days and correct pool chemicals should be used as advised by the specialized chemical supplier (Do not use calcium-containing chemicals as they can form scale on the inner heating tube and tank walls.
Page 11
MAINTENANCE 4. Cleaning the Spa Detergent residues and dissolved solids from bathing suits and chemicals will gradually accumulate in the spa’s water. To clean the spa, use soap and water then rinse. Note: Do not use hard brushes or abrasive cleaners. EMPTY, DEFLATE AND STORAGE 1.
Jet system does plug and press the Jet button to activate. ---Something is wrong with the not operate --- Call for service On 833-926-2323 or hello@aleko.com power box Heating system ---Temperature set too low ---Set to a higher temperature (68°F~ 104°F) than current water temperatu ---Dirty filter cartridge ---Clean/replace the filter cartridge in time.
Page 13
They can take this product for environmental safe recycling. Copyright 2019 ALEKO. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without the express written permission of ALEKO.
Page 14
ALEKO Products 8307 S 192ND ST. KENT, WA 98032 hello@aleko.com PHONE: 833-926-2323 ALEKO.COM YOUTUBE.COM/ALEKOPRODUCTS...
Need help?
Do you have a question about the HTIO2BLD and is the answer not in the manual?
Questions and answers