Step 9 Setting the rings of incoming call and dialing:
Click the driver icon and select
Output
Click
and select
Note: The above settings change the audio output from the build-in audio of your computer to the
phone, if you want to go back to the computer original audio setting, just select the
Internal speakers.
Proceed to Section 2.3 (Connecting the USB Dongle to your Computer)
2.3 Connecting the USB Dongle to your Computer:
Note: The first time you connect the USB dongle to your computer, the operating system detects
the hardware and installs drivers for it. The installation procedure and screens you see may vary
from the ones shown here depending on your operating system.
Connect the USB dongle to a USB connector on your computer, and make sure the
Audio Control...
USB Headset
:
15
: