Sources For Obtaining Replacement Parts Or Components; General Information - ProFlo 500 Owner's Manual

4. Failure to maintain electrical power to the treatment system in accordance with
the requirements of the manufacturer (Pro Flo Aerobic Systems, LP) or the authorized
service representative.
5. The disposal into the Pro Flo of non-biodegradable materials (i.e. plastics, coffee
grounds, etc.), chemicals, solvents, grease, oil, paints or any other type of non-
domestic, non-biodegradable wastewater . See the section in this manual titled "Items
That Are NOT Safe to Use in Your New System."
6. Daily sewage flows into the Pro Flo that exceed the plant's hydraulic or organic
design capabilities.
7. Any usage contrary to the Pro Flo System Owner's Manual and/or the Pro Flo
representatives' recommendations.
8. Damage to components caused by sewer gases, water and/or fire ants.
Sources For Obtaining Replacement
Parts or Components
Pro Flo Aerobic Systems, LP carries a full line of replacement parts
and/or components that may be obtained from your local installer,
distributor, or by writing or calling Pro Flo Aerobic Systems, LP,
P.O. Box 1425, Waller, TX 77484-1425. Telephone No. 936-372-5222.

General Information

You have the Pro Flo:
Aerator Serial Number _______________________________________
Date of Purchase __________________
It is very important that you send in the warranty registration card.
This will start your warranty on your new Pro Flo Wastewater
Treatment System. Be sure this information is sent no later than 60
days after the system is installed.
Thank you for purchasing the Pro Flo Wastewater Treatment System.
a
500 gallon per day wastewater treatment system
a
600 gallon per day wastewater treatment system
a
800 gallon per day wastewater treatment system
a
1000 gallon per day wastewater treatment system
a
1500 gallon per day wastewater treatment system
SYSTEM OWNER'S MANUAL
23