1. Keypad Functions Off function. On function and function selection during normal operation and configuration. Zero display and set zero point or enter a tare value. A weight is tare and display net weight. 2. Display Status 〖AC〗 Mains power is applied to the indicator. A weight has been tarred and display the net weight.
Press the key. The unit will perform a zeroing operation and the weight to be calibrated will be displayed (default total capacity - e.g. 60.00) If you want to change the calibration value, press the key and 0000.00 will appear. Press until the digit to be modified flashes, then press to modify...
7. Tare and Remove Tare a) Tare: When Tare status LED is off and the weight is ≥0 and stable, press【→T←】 to acquire tare and switch to net mode, the tare status LED is turned on. b) Remove tare: When Tare status LED is on, press【→T←】 will switch to gross mode and removed tare.