Growth Product 18842-002 Quick Start Manual

MODEL #:18842-002
TWO PACK TABLE LAMP
IMPORTANT SAFETY INSTRUCTIONS
Read and Save:
1. To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The plug will fit in a polarized outlet only one way.
If the plug does not fit fully into the outlet reverse
the plug. If plug still does not fit, contact a qualified
electrician. Never use an extension cord unless the
plug can be fully inserted. Do not alter the plug.
Do not install non-factory wiring or any other
2.
electrical components. Altering or modifying
the lamp in any way will render the product
unsafe.
3. Avoid laying objects directly over the power supply
cord to avoid cutting or damaging the wire.
4. Keep curtains, shades, wall hangings and all
other fabrics and objects away from the lamp,
lamp switch and light bulb. Lamps are not
designed to support additional weight.
5. Place the lamp on a stable, level surface in an
area where the lamp will not be tipped over or
bumped.
6. This lamp is approved for indoor use only.
BULB REPLACEMENT
Use one 60 Watt Type A bulb.
Bulb not included.
DO NOT EXCEED RECOMMENDED BULB
WATTAGE.
1. Turn off and unplug the lamp and allow bulb to
cool before replacing bulb.
2. Light bulb should never touch the lamp shade.
CLEANING AND MAINTENANCE
1. To clean: use a soft, dry cloth only.
2. Do not use chemical or abrasive cleaning solutions.
C
B
A
ASSEMBLY INSTRUCTIONS
1. Place
Gently pull additional cord from lamp base (A).
2. Insert and thread socket assembly (B) into lamp
Base (A) until secure.
3. Pressure fit Shade (C) onto Socket Assembly (B).
4. Install Light Bulb into Socket Assembly (B).
(Light Bulb not included).
5. Insert Plug into an electrical outlet.
6. Use the switch (D) to turn lamp on and off.
For Customer Assistance:
www.growthproductsllc.com
Made In China
the Base (A) on a flat surface.
D