AURABEAT NSP-X1 Quick Start Manual

AURABEAT
NSP-X1 Air Purifier
Quick Start Guide
For optimal results, it is essential to utilize all
filtration features and ensure proper placement within
your space.

Getting Started

1. Remove the plastic packaging from the air filters
inside the machine before operating the
Aurabeat Air Purifier.
2. Once the plastic is removed, return the
Nanocrystalline filter into the Aurabeat Air
Purifier first, followed by the High-efficiency
HEPA Grade Filter with the Pre-Filter facing
toward the front. Next, close the front panel.
3. Plug the power cord into the back of the air
purifier. Then, insert the power cord into an
electrical outlet.
4. Press the on/off button, then press the Plasma
button. The UV Disinfection Lamp will turn on
automatically.
Note:
Once powered on, you will need to activate
the Plasma feature on the Control Panel for
optimal results. This setting is not saved
when the unit is turned off.
Questions about installation?
or visit www.aurabeat-us.com
five
Call our customer service department at 888-542-3355
Aurabeat NSP-X1 Air Purifier
Placement & Room Ventilation
Placement for Commercial Spaces or Residences
With Mechanical Ventilation Systems
Place the Aura beat Air Purifier near the room's air
inlet. This allows the sanitized air to follow the
natural air inlet flow pattern throughout the
system. Do not place the Aurabeat Air Purifier near
the air outlet vents, as this may hinder
performance.
Placement for Residences or Commercial Spaces
Without Mechanical Systems:
Place the Aurabeat Air Purifier in high traffic areas.
Opening a window or door in the room will
increase the clean air exchange rate within the
space.

Filter Maintenance Schedule

Adhere to the maintenance schedule for the
machine and the filters. The Owner's Manual
contains comprehensive cleaning instructions,
including a cleaning schedule. Air purifiers and
filters are at their best when they are properly
maintained.