Set Up; Model: Motorola Bolt Smart Safe - Motorola Bolt Smart Safe User Manual

Set Up

Important
Do not store the backup keys or any life-saving medication in your safe at any time.

Model: Motorola Bolt Smart Safe

Your Bolt Smart Safe can be up and running in minutes in Offline Mode using the included Quick
Start Guide. We recommended completing the installation by turning on Tamper Detection and
Connected Mode (owner only). If you have not yet installed your safe, we recommend following
the included instructions to install your safe securely.
Power Up Safe
1. Open the Bolt Smart Safe by inserting one of the backup keys into the keyhole and
turning it counter-clockwise (to the le ) until the main compartment door opens.
2. Identify all items in the box listed on the Quick Start Guide's first page and the Meet your
Product section of this manual. If any parts are missing or defective, please call Customer
Support at +1 (800) 485-8904 for replacement parts.
3. Insert four (4) new AA Alkaline batteries into the battery compartment (located on the
inside le of the main compartment) by first opening and removing the battery cover.
According to Diagram A, ensuring correct polarity displayed on the battery cover, insert
the batteries, then replace and securely close the battery cover.
a. Do NOT use or place rechargeable batteries in the Bolt Smart Safe battery
compartment.
b. Do NOT mix old and new batteries.
c. Do NOT mix alkaline and standard (carbon-zinc) batteries.
4. Once the battery compartment cover has been closed, the "Battery" LED on the front of
the safe will be solid green (the internal lock may also be heard turning) if batteries were
installed correctly.
Set User Access Code
The process for setting the initial access code and updating the access code is the same. Simply
repeat steps 1 through 3 if you need to update the access code in the future. The instructions can
be found on the inside of your safe door as well as the Quick Start Guide.
1. If setting your safe up for the first time, use the backup key to open your safe. If changing
the access code, enter the current user access code on the keypad to unlock the main
compartment door.
ITSmart Security, LLC
12