HUMAN PRESENCE DETECTION In order to save energy, CTOUCH Neo has a built-in Human Presence Detection. Walking up to the screen automatically turns the screen on in dark mode, while leaving the room turns it off.
FIRST TIME INSTALLATION WIRED Plug the LAN-cable into the LAN-port on the bottom of the CTOUCH display, to connect to the internet. FIRST TIME INSTALLATION When turning on the CTOUCH display for the first time, the below shown installation menu pages will appear on the screen.
HOMESCREEN HOW TO USE THE HOME SCREEN Powering on the touchscreen will bring up the home screen. Choose one of the four options to get started. Interactive Wireless Web browser Select whiteboard screen sharing (optional)* video input * Selected during installation Change the source Adjust the brightness Turn off the touchscreen...
Page 5
QUICK START GUIDE CTOUCH NEO WHITEBOARDING SOFTWARE HOW TO USE THE WHITEBOARD Press the ‘Whiteboard’ option from the main menu to start whiteboarding. Other Choose marker New slide Eraser Undo/redo End session options (broad) Navigate Choose pen Choose Select slides...
HDMI out Connect an external device with a HDMI cable to this port to output the image and sound of the CTOUCH interactive display. Touch out 1/2, 3 Connect an external device to support touch control of the external device on the display.
Switch to home screen Return to previous menu or exit the on-screen menu Display or exit the setting menu screen Turn off the picture on the CTOUCH interactive diaplay and listen to the Freeze the current picture program audio only. Mute the sound...
Need help?
Do you have a question about the NEO and is the answer not in the manual?
Questions and answers