Advertisement
Step 6: Check the indicator lights
Locate the indicator lights on the end of the module. They are next to the
main harness. After powering up the device, you will notice the GREEN and
ORANGE indicator lights will flash then eventually turn on solid. Solid lights indi-
cate proper connectivity and you can proceed to the installation test.
GREEN light (power / processing):
Off: No power, the device is OFF.
8
Blinking: The device is working on current operations
8
Solid: The device is operating properly
4
ORANGE light (cellular connectivity):
Off: The cellular radio is OFF.
8
Slow Blinking: The device is searching for the cellular network.
8
Fast Blinking: The device has found cellular service and is waiting
8
to register to the network.
Solid w/ Fast Blinking every 1 second: The device is registered to the
8
cellular network but is awaiting acknowledgement.
Solid: Cellular service has been found with good signal strength and the
4
device is connected to the network with acknowledgement.
Step 7: Test installation and activation
1.
Make sure you have the "Quick Reference Guide" with you and login to your
dealer account at
SIM) to activate the device for testing. This is located on the label affixed to
the "Quick Reference Guide" as well as on the module label.
2.
Once you are logged in, click "Install or Diagnose" and follow the easy on-
screen instructions. You will also see a link for the "Dealer Portal Guide"
which gives you step by step instructions and additional info if needed.
3.
Upon successfully completing the installation tests successfully, you will be
given a 4 digit activation PIN for the vehicle owner.
SPACE PROVIDED ON THE QUICK REFERENCE
send the PIN to the vehicle owner by email or SMS text message.
4.
If you know the phone number and carrier of the vehicle owner's smart-
phone, you can push the mobile app to their phone via SMS text. They can
also easily find the app in their phone's app store/marketplace.
Step 8: Complete the installation
After successfully completing the installation configuration and test, se-
curely mount the module in the selected location with tie straps, high grade hook
& loop tape, or any other reliable mounting method, and reassemble the vehicle's
interior.
BE SURE TO GIVE THE QUICK REFERENCE GUIDE TO
THE VEHICLE OWNER. THEY CANNOT ACTIVATE OR USE
6
www.omegacarlink.com.
THE DEVICE WITHOUT THE ICC ID AND PIN.
You will need the ICC ID (aka
WRITE THE PIN IN THE
GUIDE. You can also
Advertisement
