MOLTO LUCE 711-24752dt8 Mounting Instruction

Austria, 4600 Wels, Europastraße 45, T: +43 7242 698-0, M: office
TECHNISCHE DATEN / TECHNICAL DATA
Beschreibung 75W DALI LED Driver
Description 75W DALI LED Driver
Abmessungen LxBxH: 486x31x21mm
Dimension
Artikelnummer 711-24752dt8
Product Code
75W DALI LED DRIVER
1 / 4
1
moltoluce.com
@
IP20
75W DALI LED Driver(DT8)
75W DALI LED Driver
2
75W DALI LED Driver
Wichtig: Lesen Sie alle Anweisungen vor der Installation!
Important: Read All Instructions Prior to Installation
Important: Read All Instructions Prior to Installation
Function introduction
AC 100-277V input
Digital display
L
N
PUSH DIM
FG
L DA
DA
N DA
DA
0-6 0-9
DALI/Push Signal Input
Produktdaten
Product Data
Product Data
LED-Kanal
LED Channel
LED Channel
DC-Spannung
DC Voltage
DC Voltage
Output
max. Strom
Output
Max. Current Max. 3.12A/ch, ch1+ch2=3.12A
Max. Current
Voltage Tolerance
Spannungstoleranz
Voltage Tolerance
Rated Power
Nominale Leistung
Rated Power
Voltage Range
Spannungsbereich
Frequency Range
Voltage Range
Power Factor (Typ.) Frequenzbereich > 0.99 @ 100VAC, > 0.96 @ 230VAC
Frequency Range
Total Harmonic
THD ≤ 15% (@ full load / 230VAC)
Leistungsgrad (Typ)
Distortion
Power Factor (Typ.)
Input Efficiency (Typ.)
Harmonische Gesamt- Verzerrung
Total Harmonic Distortion
AC Current (Typ.) 0.9A @ 100VAC, 0.39A @ 230VAC, 0.33A@277VAC
Wirkungsgrad (Typ)
Input Inrush Current (Typ.)
Efficiency (Typ.)
Leakage Current
AC-Strom (Typ)
AC Current (Typ.)
Standby Power
Consumption
Einschaltstrom (Typ)
Inrush Current (Typ.)
Dimming Interface
DALI DT8 (DALI consumption<2mA)/Push
Ableitstrom
Dimming Range Leakage Current
Control
Standby Stromverbrauch
Dimming Method
Standby Power Consumption
Dimming Curve
Dimm-Schnittstelle
Dimming Interface
Dimmbereich
Control
Dimming Range
Dimm-Methode
Dimming Method
Dimmkurve
Dimming Curve
70220048
2 channels LED output
WW-
CW-
NC
NC
NC
2
2
24V DC
24V DC
MAX. 3.12A/CH, CH1+CH2=3.12A
±1%
±1%
max. 75W
max. 75W
100-277V AC
100-277V AC
50/60Hz
50/60HZ
> 0.99 @ 100VAC, > 0.96 @ 230VAC
86% @ 230VAC full load
THD ≤ 15% (@ full load / 230VAC)
86% @ 230VAC full load
COLD START 2A at 230VAC
< 0.5mA /230VAC
0.9A @ 100VAC, 0.39A @ 230VAC, 0.33A@277VAC
< 0.5W
COLD START Max. 2A at 230VAC
< 0.5mA /230VAC
0.1%-100%
Pulse Width Modulation
< 0.5W
Logarithmic
DALI DT8 (DALI consumption < 2mA)/Push
0.1%-100%
Pulse Width Modulation
Logarithmic
Over Current Yes, recovers autom
Protection
Over Temperature Yes, recovers autom
Working Temp.
Max. Case Temp.
Environment
Working Humidity 10% ~
Storage Temp.
& Humidity
UL8750, C
Safety Standards
ENEC EN61
Withstand Voltage
Safety &
Isolation Resistance I/P-O/P: 100M
EMC
EN55015,
EMC Emission
EMC Immunity
EN61547, EN61000-4-2,3
186300H, MIL-HDBK
Others MTBF
• DALI DT8 Dimmable LED driver
• In compliance with IEC 62386-101:2014, IEC 62386-102:2014,
• Built-in DALI-2 interface, DALI DT8 device
• 2 channels constant voltage output, total output power up to 75
• Class Ⅱ power supply, full isolated plastic case
• High power factor and efficiency
• PF > 0.96, Efficiency > 86%
• Low standby power < 0.5W
• DALI DT8 device to control Warm White and Cool White output
• Color temperature adjustment according to DALI specifications
• Compatible with universal DALI masters that support DT8 com
• IP20 rating, suitable for indoor LED lighting applications
• 5 years warranty
Safety & Warnings
• DO NOT install with power applied to the device.
• DO NOT expose the device to moisture.

Operation

1. Set Dali Address Manually Via Buttons
1.1 Press and hold down any of the two buttons un
the button.
1.2 Click any of the two buttons once to select a di
desired DALI address appears. Click first button t
"units" position. The address can be set from 00~6
1.3 Then press and hold down any of the 2 buttons
0-6 0-9
to confirm the setting.
Note: DALI address can be manually assigned from 00-63-FF
assigned for the dimmer, and the display shows . Settin
to factory defaults.
75W DALI LED Driver
| 26 | 11 | 2021
-40℃
a