Introduction STR860E printer is a new type line thermal printer, it features in fast speed print, low print noise, high reliability, perfect print quality and ribbon needless, avoiding the vexation of regular maintenance. STR860E printer: small in outline dimension, simple operation, and extensive application, especially suitable for commercial cash register, PC-POS, bank POS and all kinds of receipts print.
1.2 Print Paper ● Thermal paper roll model: TF50KS-E (Japan paper co.ltd) AF50KS-E (JUJO THERMAL) ● Thermal paper roll: Paper Type--Thermal Paper 79.5 xф80mm(max) Inner Diameter---13mm (min.) Thickness --- 0.06mm~0.08m 1.3 Print Font ● ANK Character Set 12×24 dots,1.5(W)×3.00(H)mm ● GB GB2312-80(Chinese): 24×24 dots,3.00(W)×3.00(H)mm.
Figure 2-1 Printer Part Name Diagram 2.2 Paper Installation 2.2.1 Paper Loading Steps of Loading Thermal Paper are as below: Hold down the upper cover button on the left side, open the movable upper cover, draw a certain length of the paper roll, put the paper end on the print head, close the upper cover and press it downwards lightly.
Fig 2-1 Ethernet Interface 2.3.2 USB Interface The standard accessories of STR860E printer includes a Mini USB cable with B Type connector which connects printer and main device. The USB type belongs to the slave device type(DEVICE). Pins description of Mini-USB as Fig.2-2 below:...
—— Cash drawer driver signal 2 Signal ground —— 2.3.4 Power Connection STR860E uses the external power supply adopter as 24V±10%,2A, power socket is A-1009-3P model, as Fig. 2-4 shows: The pin assignment is as below: Pin No. Signal +24VDC Ground Fig.2-4 Definition of power socket and pin...
2.4 Buzzer, Buttons and Indicators There is one button and one inner buzzers and three indicators on STR860E printer. 【FEED】is paper feeding button, the function of its enabling or disabling the button on/off can be set by print command, when the button is enabled, press 【FEED】...
Page 11
of buzzers indicate the type of error, and it will stay on for a period of time. 2. The error can be recovered. The number of flashes of the indicator light and the number of buzzers indicate the type of error, and then it will stay off for a while. 3.
Recoverable LED Flickers once:Cutter error position error Auto-recoverable error, indicator flickers constantly, including printing head ③ over-heat error and upper case cover opening error during printing. ERROR Indicator Flickering ERROR Type ERROR Description Type LED Flickers constantly: printing head Auto-recoverable over-heat;...
[FEED] key to save the set parameter value and exit the parameter setting mode. Enter normal working mode. If the printer is turned off directly, the set parameter values will not be saved. Note: STR860E does not support button setting.
2.9 Enter the program upgrade mode In the shutdown state, first open the [paper compartment cover], press and hold the [FEED] key, then turn on the power switch, and release the [FEED] key after the status indicator and the out of paper indicator flash alternately. Then press the [FEED] key five times (USB interface support, the network port is directly upgraded in web mode), and then close the [paper compartment cover].