benza BZC248 Manual page 24

6. Be certain to read all labels when you are spraying paints or toxic materials, and follow the safety instructions. Use a
respirator mask if there is a chance of inhaling anything you are spraying. Read all instructions and be sure that your
respirator mask will protect you.
7. Always wear safety goggles or glasses when using an air compressor. Never point any nozzle or sprayer toward a
person or any part of the body.
8. Do not adjust the pressure switch or relief valve for any reason. Doing so voids all warranties. They have been pre-set
at the factory for the maximum pressure of this unit.
CAUTION: A POTENTIALL HAZARD THAT MAY CAUSE MODERATE INJURY OR DAMAGE TO EQUIPMENT.
1. Drain the moisture from the tank on a daily basis. A clean, dry tank will help prevent corrosion.
2. Pull the pressure relief valve ring daily to ensure that the valve is functioning properly, and to clear the valve of any
possible obstructions.
3. To provide proper ventilation for cooling, the compressor must be kept a minimum of 31cm (12 inches) form the
nearest wall, in a well-ventilated area.
4. Fasten the compressor down securely if transporting is necessary. Pressure must be released from the tank before
transporting.
5. Protect the air hose and electric cord from damage and puncture. lnspect them weekly for weak or worn spots, and
replace if necessary.
6 I
Original Instruction