Care And Cleaning; Maintenance - PowerXL SMART BREW Owner's Manual

Care & Cleaning
Cleaning the Appliance
1.
Let the appliance cool completely before cleaning.
2.
Clean the appliance after each use. Always turn the appliance off and unplug it before cleaning.
3.
After each use, remove the Filter and Filter Holder and discard any coffee grounds.
4.
Remove the Carafe and pour out any remaining coffee.
5.
Wash any parts in warm, soapy water and then rinse thoroughly. Dry the parts completely before returning
them to the appliance.
Descaling the Coffee Maker
With regular use, minerals and hard water can clog your coffee maker. A full cleaning with vinegar is
recommended once a month or every 60 brew cycles.
1.
Pour equal amounts of water and white vinegar into the Water Tank until the "10" line is reached. NOTE: Only
use white vinegar.
2.
Remove any coffee beans or pre-ground coffee from the Coffee Bean Box.
3. Open the door on the appliance. Place the Filter in the Filter Holder. Close the door.
4. Ensure the Carafe is in position.
5. Plug the appliance's power cord into an electrical outlet. Press the ON/OFF Button to turn the appliance on.
6. Press the GRIND OFF Button to disable the grind function. Press the CUP Button to set the number of cups
to 10.
7. Press the BREW Button. When about half of the solution has been brewed, press the ON/OFF Button or the
BREW Button to cancel the brewing function.
8. Let the appliance sit for 30 minutes to allow the vinegar to break down any internal limescale or calcium.
9. Repeat the process once more with another 10-cup brew to use up the remaining solution in the Water Tank.
Once both brewing cycles are complete, discard the vinegar.
10.
11. To flush out all traces of vinegar, run the appliance with fresh water three times. Fill the Water Tank to the "10"
line with water and repeat steps 3–7. Discard and replace the water after each brewing cycle and repeat until
all the vinegar is flushed out of the appliance.
Storage
Unplug the appliance and let cool for at least 30 minutes before storing.
1.
2. Clean the appliance (see the "Cleaning the Appliance" section). Ensure all the components are dry before
storing.
3. Store in a clean, dry place.

Maintenance

Any other maintenance must be performed by an authorized service technician. Contact customer service using
the information on the back of this manual for more information.
9