Table of Contents
Advertisement
Instructions for Use
Before First Use
1.
Unpack all parts from the box and remove any clear or blue protective film on the components. Check all
packaging material thoroughly for accessories. Wash any accessories with warm, soapy water before first use
(only select accessories are dishwasher safe).
2.
Remove and save all literature.
3.
Wash the Filter, Filter Holder, and Carafe (see the "Care & Cleaning" section). Return the parts to
the appliance.
Open the Water Tank Lid. Add water to the Water Tank. Do not exceed the "10" line in the Water Tank.
4.
5.
Plug the appliance's power cord into an electrical outlet. Press the ON/OFF Button to turn the appliance on.
6.
Press the GRIND OFF Button once to set the grind setting to off.
Press the BREW Button. The appliance will heat the water and clean the Water Tank and internal water tubes.
7.
8.
Repeat 1–2 times before using the appliance to brew coffee.
General Operating Instructions
Grinding Coffee Beans and Brewing Coffee
1.
Open the Water Tank Lid. Measure water according to the number of cups of coffee desired (see Fig. A). Do
not exceed the "10" line in the Water Tank. Note that all the water in the Water Tank will be consumed when
brewing coffee, so do not add more water than needed to make your desired cups of coffee.
2.
Open the door on the appliance. Place the Filter in the Filter Holder (a paper filter can be used instead).
Close the door. Note that this door must be closed or the appliance will not be able to brew coffee.
3.
Open the Coffee Bean Box Lid. Add a maxmimum of 5.5 oz (150 g) coffee beans to the Coffee Bean Box.
Close the Coffee Box Lid.
Ensure the Carafe is in position with the Carafe Lid on the Carafe before brewing coffee.
4.
5.
Plug the appliance's power cord into an electrical outlet. Press the ON/OFF Button.
6.
Press the CUP Button to program the number of cups of coffee you are brewing.
7.
Press the STRENGTH Button to adjust the strength of your coffee.
8.
You can use the Grind Adjustment Lever on the side of the appliance to adjust the coarseness of your coffee
beans (see Fig. A). For most uses, the medium setting is recommended.
9.
Press the BREW Button. The appliance will automatically grind and then brew the coffee beans. You can press
the ON/OFF Button or the BREW Button to cancel the grinding and brewing process at any time. Note that
the coffee strength and number of cups cannot be adjusted during the brewing process.
10.
When the appliance is done brewing coffee, it will beep five times. The heat icon ( ) on the display panel will
illuminate, indicating that the appliance is keeping your coffee warm for 30 minutes. After 30 minutes, the
appliance will beep three times and shut down automatically. If you do not need the appliance to keep your
coffee warm, you can press the ON/OFF Button or the BREW Button to stop the appliance from warming
your coffee.
11.
Allow the appliance to cool. Then, check and clean ground coffee residue out of the Filter after each use.
6
Advertisement
Table of Contents
