Table of Contents
Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode which is
indicated by the blue light blinking rapidly.
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the reset button for 5 seconds until the blue light
begins blinking rapidly.
Add device through network
1. Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
2. Select the product type from the list of options in the app (Home Security > Cameras).
3. Ensure that the device is in pairing mode, with the blue light blinking rapidly, and tap
"Confirm light is rapidly flashing".
4. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important
that your SmarterHome™ device and the app are connected to the same Wi-Fi
network during setup.
9
Advertisement
Table of Contents
