Kogan SMARTERHOME KABABYCAMGB User Manual page 7

2. Peel one side of the backing off the adhesive strip and stick the strip onto the desired
location on the wall. Peel the other side of the backing off the strip, then stick the
bracket onto the strip.
3. Insert the camera into the bracket from any angle.
Powering on
1. Connect the temperature and humidity sensor into the Micro USB port of the camera.
2. Connect the Micro USB end of the power cable into the temperature and humidity
sensor, then connect the USB-A end into the power adapter. Plug the power adapter
into a socket and switch the socket on. The baby monitor will then turn on.
7