Advertisement
3. Now short press the Projection button, you can project your laptop's screen to the display
screen immediately. The LED will light dimly white during the projection.
Dongle
HT-Voyager Dongle
Laptop
Ÿ Enter full screen mode: When there are multiple screens (including screen projected
through the Dongle) shown on the sink display, hold projection button for about 2
seconds, you can have your laptop's screen displayed in full screen.
Ÿ Freezing the projected screen: Press the Freezing button, the screen projected by the
Dongle on the sink display will be frozen and the audio projected through Dongle is also
paused. A transparent pause icon will appear on the center of the projected screen. Press
the button again, the screen will be unfrozen, the icon will disappear, and the projected
screen will be synchronized with the source device to display.
Note:
The freezing function doesn't affect the source device.
Ÿ
When a touch screen is connected to the receiver, freezing/unfreezing the projected
Ÿ
screen, the USB HID touch signal from the touch screen returned to the source device
will be paused/recovered during transmission.
Ÿ
When the audio output of the sink display is from a different projected screen,
freezing/unfreezing function doesn't affect the audio output of it.
Hall Technologies
September 1, 2022
Laptop
Display
HT-ATLAS Speakerphone
Display
Page 5 of 7
Advertisement
