MTI FREEDOM MICRO Installation Manual

FREEDOM MICRO UNIVERSAL BRACKET
1
Loosen the bracket arms with the Double Sided System
Tool via the access holes on the back and pull the
bracket arms out.
3
Place device in the bracket and press down for
NanoStick to hold in place.
www.MTIGS.com | T:800.426.6844
-CONTROLLED DOCUMENT- 063-00369 B-0 Status: Approved
FREEDOM MICRO ® INSTALLATION GUIDE
2
For new brackets, peel clear film off of NanoGrip. If
reusing bracket, nano-grip can be cleaned with water
and a soft cloth.
4

Adjust the brackets to fit the device.

MTI P/N 063-00369 rev B ©2021 MTI All Rights Reserved
ECO-112005
1