HP HPTouchSmart610 Upgrading And Servicing Manual page 8

6 Install the two screws that secure the side panel to the
computer.
7 Reinstall the drive door by sliding it toward the center
of the computer.
8 Slide the drive door to the edge of the computer
making sure to align the screw hole in the drive door
to the screw hole on the computer.
6
9 Install the screw securing the door to the back of the
computer.
10 Press the top edge of the screw cover on to the drive
door and then press down on the bottom edge of the
screw cover until it snaps into place.
1 1 Place the computer in an upright position.
— Removing and Replacing a CD/DVD Drive
647642-001