Installation; Pre-Installation; Pre-Installation Planning; Installing The Fan-Coil - Wine Guardian SP25 Installation, Operation And Maintenance Manual

Installation

For questions or help regarding installation, call customer service at 1-315-452-7400 or
email info@wineguardian.com
installed.

Pre-Installation

Test the system before installing it to check for non-visible shipping damage.
✓ Set the system on the floor or on a sturdy, level surface.
✓ Ensure the control cable and remote interface controller are plugged into one of
the com ports.
✓ Plug in the system.
✓ Press the on/off switch to see if the control illuminates. This indicates the system
has power.
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
SHARP EDGES ARE PRESENT INSIDE THE WINE GUARDIAN SYSTEM

Pre-Installation Planning

Installation of residential and commercial split systems must be performed by qualified service
technicians with proper training in the installation, start up, service, and repair of these systems.
Certification to handle refrigerants is also required.
Prior to installation, determine how best to mount the system.
ing The
Install Fan-Coil
Floor Mounting - Mount the Wine Guardian fan coil on the floor but elevate it 4" (10cm)
as a minimum on a frame with a plywood surface to keep it away from water. Allow
adequate space for the external drain.
a sketch of the proposed area where the unit is to be
IMPORTANT
20